Videocon split air conditioners are designed for comfort and energy efficiency. However, like all electronic appliances, they can sometimes develop faults. Thankfully, Videocon ACs are equipped with a self-diagnosis system that displays error codes to help users and technicians identify the issue.

In this blog, we’ve compiled a list of common Videocon split AC error codes, their meanings, and actionable solutions for each.

📋 Videocon Split AC Error Code List with Descriptions & Solutions

E1 – Indoor/Outdoor Unit Communication Error

• Description: The indoor and outdoor units are not communicating properly.
• Solution:
  • Turn off power, wait 5 minutes, and restart the unit.
  • Inspect communication wire for loose or damaged connections.
  • Replace the PCB if wiring is fine but the error persists.

E2 – Zero Crossing Detection Fault

• Description: AC is unable to detect the correct voltage signal frequency.
• Solution:
  • Check for voltage fluctuation.
  • Inspect the indoor PCB for malfunction.
  • Replace the PCB if necessary.

E3 – Indoor Fan Speed Error

• Description: The indoor fan is running too slow or not at all.
• Solution:
  • Clean the indoor fan and check for any blockages.
  • Test the fan motor and capacitor.
  • Replace the fan motor if it’s faulty.

E4 – Indoor Room Temperature Sensor Error

• Description: The sensor monitoring the room temperature is defective or disconnected.
• Solution:
  • Check the sensor wiring and connections.
  • Replace the temperature sensor if damaged.

E5 – Indoor Coil Temperature Sensor Error

• Description: The sensor on the indoor coil is not functioning correctly.
• Solution:
  • Inspect the sensor and wires for damage.
  • Replace the coil sensor if required.

E6 – Outdoor Coil Temperature Sensor Error

• Description: The sensor on the outdoor coil has failed.
• Solution:
  • Check for loose or cut wiring.
  • Replace the outdoor coil temperature sensor if needed.

E7 – Compressor Overload / High Discharge Temperature

• Description: The compressor is overheating or overloading.
• Solution:
  • Turn off the AC and allow the system to cool.
  • Ensure the outdoor unit has proper ventilation.
  • Contact a technician to inspect the compressor and overload protector.

E8 – Water Drain Error

• Description: Water drainage from the indoor unit is blocked or the pump has failed.
• Solution:
  • Clean the drain pipe and filter.
  • Check if the drain pump is working.
  • Replace the pump if it’s not operating properly.

E9 – EEPROM/Memory Error

• Description: The internal memory chip (EEPROM) is malfunctioning.
• Solution:
  • Try restarting the AC.
  • If the error returns, the indoor PCB may need replacement.

F1 – Outdoor Unit Temperature Sensor Error

• Description: The outdoor temperature sensor is not responding.
• Solution:
  • Inspect the sensor and wiring.
  • Replace the sensor if defective.

🧼 Preventive Tips to Avoid Videocon AC Errors

• ✅ Clean filters every 15 days.
• 🔌 Use a voltage stabilizer to prevent electrical surges.
• 🌬️ Keep the outdoor unit free from obstructions.
• 🧰 Schedule regular professional maintenance.
• 🕹️ Do not ignore blinking lights or beeping sounds—they indicate faults.

📞 When to Call a Professional

You should contact an authorized Videocon service technician if:

• The same error keeps appearing after resets.
• Your AC is not cooling effectively.
• You hear loud or unusual sounds from the unit.
• There are electrical burning smells or water leakage.

🔚 Conclusion

Understanding these Videocon split AC error codes helps in early fault detection and can save time, effort, and service costs. While basic issues like blocked filters or drainage problems can be fixed at home, technical faults with sensors or PCBs are best handled by professionals.

Need expert AC repair or servicing? Contact Videocon customer support or an authorized service center for reliable solutions.

---